A tool to synchronize plate is that what you need to synchronize the stage of your motor in a simple way and without too much effort.
In fact, it is designed just for this mission.
So, goodbye to the headaches, loss of time, the exaggerated effort and machucones that involves adjusting your engine.
Read on and discover the surprising answers to these and many more questions.
But before, a small spoiler: at the end of this article, we will reveal a key piece of information about the synchronization tool of the deck that will probably not be aware of. Are you ready? Let's go there!
What is a tool to synchronize stage?
The tool to synchronize plate is a device designed to to facilitate the process of synchronization of the engine, particularly in the setting of platinum, that is an essential component of the dealer in the internal combustion engines.
Use the correct tool for this task is of vital importance, as it ensures the correct functioning of the motor and helps prevent long-term problems.
How is the tool to synchronize stage?
The tool to synchronize plate is a metal rod with a threaded end that fits on the hole of the camshaft.
The other end has a graduated scale to indicate the angle of rotation of the camshaft.
The tool also has an adapter with metric thread that is connected to the rod and that serves to fix the position of the camshaft.
In addition to this, you usually have a size of approximately 30 cm long and 1 cm diameter, its weight is usually less than 200 g and its material is usually steel, resistant to wear and corrosion.
Why do you need a tool to synchronize stage?
At this point, it is possible that you're wondering: "why should I worry about getting a tool to synchronize stage?".
The answer is simple: because having the right tool can make all the difference, you'll work more quickly and effectively.
Imagine that you are in the middle of a deserted road and your car stops suddenly.
If you are fan to the car and have to hand the right tool, you might be able to make adjustments at the plate and put it back in your car.
However, if you don't have the correct tool, you might find yourself stranded on the road waiting for the crane.
How do you use a tool to synchronize stage?
To use the synchronization tool of the stage, you must follow the following steps:
- Disconnect the negative battery cable and remove the distributor cap.
- Locate the hole of the camshaft in the engine block and clean it with a rag.
- Screw the adapter of the tool into the hole of the camshaft and tighten it with a wrench.
- Screw the rod of the tool to the adapter and set it to the desired length.
- Rotate the camshaft by hand until it matches the mark to top dead center (TDC) of the first cylinder.
- Set the angle of the camshaft with the screw of the adapter.
- Measure the separation between the contacts of the stage with a feeler gauge and adjust it according to the manufacturer's specifications.
- Check the operation of the engine and repeat the process if necessary.
Where can I find a tool to synchronize stage?
There are various shops and websites where you can buy a tool to synchronize stage.
One of the best websites is Amazon, and here are the most popular store:
How much is a tool to synchronize plate engine?
The prices of the tools to synchronize stage can vary significantly depending on the brand, the model, and the place where it was acquired.
However, prices range between 30 and 150 dollars.
Although you can find economic tools, remember that quality is a crucial factor to consider.
Sometimes, spending a little more a tool of the highest quality can result in a long-term savings, since you might avoid costly repairs.
What other tools you need to synchronize stage?
In addition to the synchronization tool of the stage, you will also need other tools to do the job, such as:
- A ratchet with a 10mm to fasten the screw of the adapter.
- A feeler gauge to measure the separation of the stage.
- A flat-blade screwdriver to adjust the screw to the plate.
- A rag to clean the hole of the camshaft.
These tools can be found in any tool box basic.
Tool to synchronize distribution plate
Sometimes, it is possible that you need a specific tool to synchronize the distribution of the stage in your engine.
Like the tool to synchronize stage, this tool also it is designed to facilitate the adjustment process and to ensure the proper functioning of the engine.
Conclusion
Finally, and as promised, we come to the revelation promised at the beginning of the article.
The synchronization tool of the plate is so versatile that, if you learn to use it correctly, not only you will be able to adjust the plate of your motor, but also to perform other maintenance tasks that can help prolong the life of your vehicle.
So, this tool is much more than a simple device to adjust the platen. How interesting, right?
